TEK RM5110
Forum rules
Use tags for the type of equipment your topic is about. Include the "repairs" tag, too, when appropriate. If a new tag is needed, request one in the TEAdministration forum.
Use tags for the type of equipment your topic is about. Include the "repairs" tag, too, when appropriate. If a new tag is needed, request one in the TEAdministration forum.
Re: TEK RM5110
A magnificent result. It makes me feel guilty about my various delayed projects needing cap replacement.
Tags:
Re: TEK RM5110
Finally got the opportunity to get the upgraded PSU installed. Powered up with no issues and voltages spot on.
I'm going to order the JAMMA cable as recommended by Paul and modify it for use as an extender so I can calibrate the plug-in's. But for now this project is complete. Moving on to the hp 211A.
I'm going to order the JAMMA cable as recommended by Paul and modify it for use as an extender so I can calibrate the plug-in's. But for now this project is complete. Moving on to the hp 211A.
An old gray beard with an attitude. I don't bite.....sometimes 
Re: TEK RM5110
That really does look good in the pictures. Did the CRT's display improve once the upgraded rebuilt power supply? If the CRT's worn out, it's got to be something that has to be seen in person because it looks great in the photos.
Re: TEK RM5110
Surprisingly the CRT display did improve slightly after the re-cap and I'm not quite sure why. The PSU voltages and ripple were well within spec prior to any work being done.
An old gray beard with an attitude. I don't bite.....sometimes