Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

The place to be when you have TEA. Discuss all kinds of test equipment.

Important: Use tags for the type of equipment your topic is about.
Forum rules
Use tags for the type of equipment your topic is about. Include the "repairs" tag, too, when appropriate. If a new tag is needed, request one in the TEAdministration forum.
mansaxel
Posts: 435
Joined: Sun Oct 23, 2022 5:52 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by mansaxel »

mnementh wrote: ↑Tue Oct 20, 2026 12:47 pm
$10, yo.
The only thing I can fault the PD units for is their mains transformer being one primary winding only, at "insufficient voltage". The rest is simply gorgeous.
User avatar
mnementh
Posts: 1380
Joined: Sat Oct 22, 2022 7:32 pm

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by mnementh »

Image

Happy Halloween, all you maniacs!!!

mnem
yes, you may touch it. :mrgreen:
tggzzz
Posts: 2841
Joined: Sat Oct 22, 2022 8:17 pm

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by tggzzz »

mansaxel wrote: ↑Sun Oct 25, 2026 2:55 pm
mnementh wrote: ↑Tue Oct 20, 2026 12:47 pm
$10, yo.
The only thing I can fault the PD units for is their mains transformer being one primary winding only, at "insufficient voltage". The rest is simply gorgeous.
The PD 2020 has two primary windings, an LM399, 1mV digital resolution with a potentiometer for further tweaking. The current overload performance is also good (cf some PSUs are bad or ugly).

Gorgeous.

Image
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

tggzzz wrote: ↑Tue Oct 27, 2026 12:58 am Gorgeous.
Unquestionably. I'd love one of those. Actually, I'd like two, for symmetrical supplies. Or a power inverter as an add-on for one. Technically, I could make one from scratch, but those dials would be tricky to make.
tggzzz
Posts: 2841
Joined: Sat Oct 22, 2022 8:17 pm

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by tggzzz »

EC8010 wrote: ↑Tue Oct 27, 2026 10:33 am
tggzzz wrote: ↑Tue Oct 27, 2026 12:58 am Gorgeous.
Unquestionably. I'd love one of those. Actually, I'd like two, for symmetrical supplies. Or a power inverter as an add-on for one. Technically, I could make one from scratch, but those dials would be tricky to make.
If you do blunder across one, just buy it. They are rare. I bought mine in 2018.

I tend to keep a record of fleabay "sold" prices for selling and insurance purposes, and haven't got any such record.
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

I wouldn't hesitate. What is wrong with the forum? It is molasses-slow.
User avatar
bd139
Posts: 1393
Joined: Sat Oct 22, 2022 7:29 pm
Location: AWOL

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by bd139 »

Probably the ongoing PHP thing. Either unpatched and the server is hosed. Or DoS attack from exploit attempts / bots.
User avatar
mnementh
Posts: 1380
Joined: Sat Oct 22, 2022 7:32 pm

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by mnementh »

EC8010 wrote: ↑Tue Oct 27, 2026 5:36 pm What is wrong with the forum? It is molasses-slow.
The PHP Zer0-day that's been all in the news, and the forum is built on phpBB. I do wish @bitseeker would assign admin rights on the forum to one of the regulars... this is getting painful.

mnem
:roll:
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

It took 40s for this "Reply" window to open; that's ridiculous. This needs to be fixed or the forum will be abandoned.
User avatar
Robert
Posts: 282
Joined: Tue Nov 01, 2022 8:08 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by Robert »

TEA!
I've been looking for a smaller function generator with arbitrary waveform capability for a while. Not very keen on the HPAK 33120A for a couple of reasons including value for money and the VFD. So a Telulex SG-100A appeared on ebay. New one on me but a bit of research shows it is the same as a Berkley Nucleonics Corp 625A or BK 4070 (which Mnementh has https://www.eevblog.com/forum/testgear/ ... rmware/25/). It's a nice unit with output up to 21.5 MHz. Arb amplitude is 12 bits. If it was good enough for BNC to buy the company the generator must be OK.
It was listed as used and starting price of £68. I was the only bidder :)
It arrived today (left outside by Evri :roll: It's missing a bump-on foot, the bail handle doesn't lock and it needs a clean, but it works and it IS the A version with arbitrary function. So I'm happy.
Telulex.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by Robert on Fri Nov 06, 2026 5:18 pm, edited 1 time in total.
tggzzz
Posts: 2841
Joined: Sat Oct 22, 2022 8:17 pm

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by tggzzz »

Looks nice; I've wondered about getting an ARB, but I have an Analog Discovery - which is sufficient so far.

But the HPAK34410A is a DVM and you misspelled "Nevri" :)

In other news, I've just flogged a first edition book for 40 times more than I paid in 1977, packed it, printed the fleabay label - and noticed the purchaser is in the same village. I could have walked there in the time it took me to pack it!
User avatar
Robert
Posts: 282
Joined: Tue Nov 01, 2022 8:08 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by Robert »

I'm tired, been driving SWMBO around all day.
I did of course mean the 33120A.
Bail arm was an easy fix, loose screws.
User avatar
Robert
Posts: 282
Joined: Tue Nov 01, 2022 8:08 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by Robert »

So I'm a sucker for some optical kit as well as TE. I just made an offer on a AGEMA Thermovision 450. Not that I need another thermal imaging camera, have 4 already including a fairly modern Flir E6 as well as other night vision kit. The 450 is a 1990's vintage mechanically scanned medium wave unit with thermoelectric cooling. This is a niche between LN2, high pressure air or mechanical (sterling) cooled units that are hard to use or have limited life an modern bolometer array units. This one is in the case but absolutely filthy. Working condition is unknown but the price makes it worth the risk. I've repaired a mechanically scanned LN2 cooled camera in the past, I'll give this one a go.
https://www.ebay.co.uk/itm/257840917658?
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

Looks like a professional (not broadcast) Sony CCD camera, modified. I don't see there will be any mechanical scanning there, it will have a CCD array. Presumably with the IR filter removed.

I have an experiment running with six DMMs measuring the current of six CCSs and the seventh supposedly monitoring temperature. The seventh (a Keysight 34470A) is disgracing itself by coming up with bizarre temperature numbers. It currently claims 13.69C when the temperature cabinet is set to 28C. Unplugging the thermocouple doesn't affect its numbers. Terrific! I shall manually log temperature with a cheap and cheerful meter on the thermocouple. Just as well I started with low temperatures above ambient that I don't expect the (home-made) cabinet to do very well.
User avatar
Robert
Posts: 282
Joined: Tue Nov 01, 2022 8:08 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by Robert »

EC8010 wrote: ↑Sun Nov 08, 2026 3:32 pm Looks like a professional (not broadcast) Sony CCD camera, modified. I don't see there will be any mechanical scanning there, it will have a CCD array. Presumably with the IR filter removed.
<SNIP>
Nope, Just the electronic viewfinder is a Sony item. All the rest is bespoke. A proper thermal imager. Single "pixel" sensor, tilting plane mirror for frame scanning and hexagonal spinning mirror for line. Lens is germanium. Output is composite video. Being medium wave (3-5um) it has a different "view" to the long wave (7.5-13um) micro bolometer array sensors used in modern uncooled cameras. This includes better contrast of small temperature changes.
https://www.axiomoptics.com/blog/the-di ... r-cameras/

Quick update on the thermal camera. We had a visitor and then I was away on business so hadn't touched it. Lashed up a power lead, applied 12V and turned it on. There was a reassuring sequence of whirring and whining noises indicating the scanner was running and syncing. However there was nothing on the electronic viewfinder :( So I lashed up an external monitor on the video output an low and behold its working :D Well it sees the dog.. Need to get a stable set-up and hot sources and do some proper tests. But even a basically working medium wave imager for £81 is a bargain. Even more so as it has the optional FDD recorder option. I'll replace the viewfinder with a small flat screen.
Last edited by Robert on Sat Nov 21, 2026 8:46 pm, edited 1 time in total.
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

Thanks for that; interesting stuff.

On the subject of temperature, I measured six nominal 3mA CCSs in home-made temperature cabinet (£20 table-top oven from Aldi, fitted with PID controller and internal fan). It was ten minutes between steps and meters were logged every second. The actual temperatures aren't of interest. What is interesting is the way the steps change as temperature increases. This is trying to tell me something, but I haven't yet worked out what. I expect to see an exponential on the leading edge due to thermal insulation on the CCSs, but the decay along the top was not expected. A Type K thermocouple and meter showed constant temperature a couple of minutes after a step (that was what the disgraced 34470A was supposed to be logging).
You do not have the required permissions to view the files attached to this post.
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

I still haven't worked out exactly what those decays are telling me (if anything), but I've analysed the data and established that the six CCSs have a +0.028mA per C temperature temperature coefficient, with a standard deviation of +/-10%.

I have just been inside my Valhalla Scientific 4014 resistance meter and calibrated it against my (newly calibrated) standard resistors. It has real tweaks needing a screwdriver, not "Press this button next". Took a bit of working out which bit was which because the diagram in the manual wasn't quite the same as reality, but it's all within specification now. At 4 1/2 digits, its accuracy is debatable compared to a 6 1/2 digit DMM, but it has the same resolution on its 2R range as my 34470A and is nicer to use.
User avatar
AVGresponding
Posts: 788
Joined: Sat Oct 22, 2022 7:30 pm
Location: The Yorkshire

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by AVGresponding »

I wonder if you could provide any info in the comments for this vid, @MED6753. He has an IBM Tek 453 and is wondering about the relationship between the two companies.

https://www.youtube.com/watch?v=LQmGwK1 ... L&index=65
nuqDaq yuch Dapol?

(╯°□°)╯︵ ┻━┻
User avatar
EC8010
Posts: 628
Joined: Mon Sep 08, 2025 12:41 am

Re: Test Equipment Anonymous (TEA): Discussion and Group Therapy thread Part 2

Post by EC8010 »

AVGresponding wrote: ↑Sat Nov 21, 2026 2:20 pm He has an IBM Tek 453 and is wondering about the relationship between the two companies.
One customer swung enough money to request a change to the front panel's silk screen? I favour MK mains plugs at home, but I have variants; some have a BBC logo in place of MK, one has Hotpoint, another P.O. (Post Office) and I'm sure I've seen NHS (National Health Service).
Post Reply