The place to be when you have TEA. Discuss all kinds of test equipment.
Important: Use tags for the type of equipment your topic is about.
Forum rules
Use tags for the type of equipment your topic is about. Include the "repairs" tag, too, when appropriate. If a new tag is needed, request one in the TEAdministration forum.
A local Facebook Marketplace find. Only $50 USD and we all know how much they go for on Evil Bay. TM503 with a DM501 DMM, FG501 Function Generator, and a PS503 Dual Supply. Unknown if it powers up. Seller got it from a storage unit and didn't have ability to test. It's damn dirty and will need a good clean up. And if the cabinet still looks that dull after cleaning then Papa Smurf's Paint Shop will be activated for the first time in almost 2 years. And there will be no attempt at power up until the main PSU as well as each plug-in is checked for shorts first. And of course will get a complete re-cap.
An old gray beard with an attitude. I don't bite.....sometimes
Very, very nice. I have a TM503 but with the low distortion sine generator and the distortion analyser, complete with IM analytics option. Quite handy.
Nice one Mike, I can't say that I'd ever seen one before, but that looks pretty impressive, and I await your usual posts as you work your round it recapping and doing whatever is required to get up and running and looking splendid in Papa Smurf blue.
Compare this photo to what I posted yesterday. The cover cleaned up so well that painting isn't required.
The power supply. Still needs to be cleaned then tested for shorts.
And now. Some porn. This is the DMM.
The function generator. I see beaded tants. They must go.
The power supply. More beaded tants.
The plug-in's have property tags from the Bronx Municipal Hospital in NYC. Never heard of that hospital but found out that it's now called Jacobi Hospital.
An old gray beard with an attitude. I don't bite.....sometimes
It's tempting and I've used the dishwasher before to clean parts but I worry that the open frame power transformer won't like it. I'll come up with something to clean that PSU.
An old gray beard with an attitude. I don't bite.....sometimes
I'm sure you've cleaned a lot of things like this before. This looks like accumulated dust rather than anything nasty, such as damp or worse, tobacco tar. I'd use a paint brush and vacuum cleaner, then a damp cloth.
I have heard of "brown" radios - that is ones caked in tobacco tar - having the chassis put in the shower, sprayed with bathroom mousse, left for 15 minutes for the mousse to do its work, and then rinsed off and put in an airing cupboard to dry. It seems less drastic than a dishwasher, but I can see how a lot could go wrong.
MED6753 wrote: ↑Wed Jun 12, 2024 12:23 pm
It's tempting and I've used the dishwasher before to clean parts but I worry that the open frame power transformer won't like it. I'll come up with something to clean that PSU.
I'd never put any electronic bits in a dishwasher personally, as you say the tranny may not like that for a start and would give you an extra headache to deal with. Yes, I put cabinetry in a dishwasher before and it did a pretty good job.
Decided to check the DC voltages and the 11.5V measured 7.7V with 2VAC ripple. C35 is open and confirmed with the Peak tester. Submitted the order for total re-cap of the main PSU and the plug-in's.
An old gray beard with an attitude. I don't bite.....sometimes
MED6753 wrote: ↑Wed Jun 12, 2024 12:23 pm
It's tempting and I've used the dishwasher before to clean parts but I worry that the open frame power transformer won't like it. I'll come up with something to clean that PSU.
I've only ever gone to putting keycaps from keyboards in the dishwasher. The original IBM Model M and the Sun Type 5 keyboards have caps that remove with ease and de-griming them is a great step forward when your favourite keyboards are either vintage or expensive.
(Having said that, I do have a Unix Layout Type 5 keyboard, with optical mouse and mouse pad, NIB, somewhere in my garage. Probably would fetch a handy sum, if I could find someone who can cope with Larry owning SUN these days. )
MED6753 wrote: ↑Wed Jun 12, 2024 12:23 pm
It's tempting and I've used the dishwasher before to clean parts but I worry that the open frame power transformer won't like it. I'll come up with something to clean that PSU.
I've only ever gone to putting keycaps from keyboards in the dishwasher. The original IBM Model M and the Sun Type 5 keyboards have caps that remove with ease and de-griming them is a great step forward when your favourite keyboards are either vintage or expensive.
(Having said that, I do have a Unix Layout Type 5 keyboard, with optical mouse and mouse pad, NIB, somewhere in my garage. Probably would fetch a handy sum, if I could find someone who can cope with Larry owning SUN these days. )
Never thought about doing that with mine, I find the best solution and easiest way is pull the caps and stick the in a bowl of hot water with washing up liquid soap, let them sit there for a few minutes and then give them a swirl around in the water. Take them out and place on a spread out tea towel and leave for around 20 minutes to dry, and they come up like new caps again.
MED6753 wrote: ↑Thu Jun 13, 2024 8:23 pm
The PSU cleaned up well and no shorts were found.
A beautiful job, and no need for any over the top measures, quite likely to prove disappointing.
All it took was a soft brush to loosen the caked on dust. The project is now on hold until the replacement capacitors arrive next week. The cost of the capacitors exceeded what I paid for the unit by $7 USD. So I have $107 USD into it which is still much cheaper than typical Ebay. And my labor is super cheap.
An old gray beard with an attitude. I don't bite.....sometimes
Decided to see if any of the plug-in's work. The DMM works but is inaccurate. That reading should be 2.500V. Resistance is also very unstable. The function generator is DOA. No output. Didn't check the power supply yet.
After replacing the other 2 capacitors in the main supply I'll concentrate on fixing the DMM. The function generator will be a follow up as well as the power supply.
An old gray beard with an attitude. I don't bite.....sometimes
So today I attempted to calibrate the DCV and Ohms. It did not go well. All the internal voltages were checked as per the manual and were in spec. But the best I could do on DCV is +2.659V vs +2.501V. Definitely NFG.
The Ohms did initially calibrate well but every once in a while it goes wacko. There's nothing loose that I could find and my standard resistance box is fine. And who but only Tek would have the lowest resistance range at 2K ohms. Where is the 200 ohm range? Fluke and hp have it. Makes doing low resistance checks worthless.
Can't have enough DMM's? Yes you can. I'm not impressed with this DMM. I'm seriously considering throwing it into my parts stash. Going to troubleshoot the function generator next.
An old gray beard with an attitude. I don't bite.....sometimes